The 3D Printer Toothbrush | Nozzle Cleaning Brush
Print Profile(1)
Bill of Materials
- A1WIPER x 1: BambuStore
Description
3D Printer Toothbrush_ Nozzle Brush Cleaning Tool CTNBA
C59 ToolWorks – High-Performance Printable Tools
An essential tool
for keeping your 3D printer nozzle clean, designed for easy and effective cleaning.
Nozzle Wiper Handle
This handy handle lets you attach a nozzle wiper from a Bambu A1 printer—something you likely already have in your spare parts if you own an A1. If not, they are available on the Bambu store or through third-party online retailers. The design features a tapered hole that securely holds the wiper in place.
The handle is perfect for removing oozing or stuck melted plastic on the nozzle and around the silicone sock.
Printing Instructions
If you printed V1.0 and the wiper detaches, trim the lip around the bottom of the wiper and consider adding glue if the problem persists with a used wiper. V1.1 addresses this issue, but if you're using an old wiper, please use glue. Thank you for your support!
Assembly Instructions
- Insert the Wiper:
- If it's a new wiper, remove the transparent blue backing from the adhesive tape.
- Insert the wiper with the side that has the most rounded edge facing outward.
- Use a flat screwdriver or a similar tool (not too sharp) to gently press the wiper into place.
- Ensure the wiper sits securely in the tapered section at the bottom by gently pushing it with your fingers.
Cleaning Instructions
- Lower the bed to allow easy access, making sure it doesn't come into contact with the nozzle to prevent interference with cleaning or future prints.
- Preheat the nozzle to around 200°C.
- Gently rub the nozzle back and forth to remove any debris.
- Turn off the nozzle after cleaning.
Enjoy effortless nozzle cleaning!
Action HD Shorts Video: Soon!
V1.0 Print Specifications
Material: Whatever you like !
Printer Settings:
- Profile: Standard
- Layer Height: 0.20 mm
- Material used: PETG
- Mode: CERTIFIED LUDICROUS
- Infill: 15%
- Walls: 4
- Bottom Layers: 3
- Top Layers: 5
Printing Details:
- Supports: Not required
- Print Time: 00:15:32 (00:10:00 -/+ Ludicrous)
- Filament Usage: 0.29 oz
- Estimated Cost: ~$0.21 (based on a $26 PETG spool)
Boost Me (for free)
🚀 Boost Your Project! 🚀
If you love what I'm working on, hit the Boost button! Your support helps me continue to create, improve, and share even more exciting designs. Thank you for being part of this journey!
Enjoy your printing journey, and remember—keep your fingers away from the poop chute, she's angry!
"I’ll be sure to keep you updated with any future developments. If you come across any issues or need assistance, don’t hesitate to reach out—I’m here to help!"
04/03/2025 V1.1: The wiper slot has been upgraded for easier installation and to reduce "ungluing" issues that previously required glue or cutting the ridge around the wiper base.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Current ver.1.1_05/11/2026
© 2026 C59 Design Lab. All rights reserved.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (450)