Plush Bunny Lop eared
Print Profile(2)
Description
This is a similar bunny to my other one I have increased walls to 3, and used adaptive rectangle infill for strength.
This model LOOKS AND FEELS BEST in matte filament
0.2 mm layer height
20% infill for arms and ear strength… just to be safe
ALWASY ALWAYS ALWAYS use supports. If the slicer leaves them off or it doesn’t look like enough, ADD MORE
Don’t remove until the print comes off the plate easily. Usually when it cools
Most people print this beautifully, however, after many prints, the main issues are
- Not using support/enough support
Adhesion issues I HIGHLY RECOMMEND this nano polymer adhesive . Nothing works as well as this stuff, literally nothing . I don’t sell it, someone just showed it to me so I pass it on, it’s pricy, but it lasts forever. A few drops lasts about 10 prints
Not adjusting print settings for your printer. This model was tested originally on a Bambu A1 if you have something different, you might need to adjust
If You have issues please reach out, I’d love to help troubleshoot this
*********IMPORTANT*******
this model prints best on Bambu printers. If you have a different printer please adjust your settings appropriately
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (27)