Ford fuse panel cover - replaces 7L1Z-14A003-B

Ford fuse panel cover with extra clearance and cutouts allowing space for hardwired power/fuse taps.

After hardwiring the power to a new dashcam in my 2010 Ford F-150, I found  that the stock fuse box cover no longer fit in place due to the added height of the fuse taps. I designed this fuse panel cover to both offer more clearance above the fuses, as well as offer a side cutout allowing the new power wires a safe place  to be routed.

Prints best in PETG. I used a .6 nozzle on a Flashforge 5M. Should print fine with .4 nozzle too. I was able to print this without brim or supports. The lock tab cutouts bridged just fine without supports. Print with the top face of the cover face down on the bed.