51mm Combo Tamper and Distributor, e.g., for Delonghi Dedica - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Matze

Household>Other House Models

IP Report

Print Profile(1)

All

0.16mm layer, 5 walls, 15% infill

Designer

5.6 h

2 plates

4.7(3)

Open in Bambu Studio

Boost

212

223

Released

Description

I was stumbling upon the original model: https://makerworld.com/de/models/855626-professional-barista-tamper-and-distributor-set#profileId-804852 and thought, why not making a combo version, featuring both tamper and distributor/leveler in one part.

Therefor saving space on the table, saving filament and saving printing time:

115 to 140g (combo version vs original two parts version, including the base it is 45g more filament saved)
6h print vs 8h print (add two more hours to the two parts version if considering one base less)
Same height adjustment as the original (different height on both sides possible)

It is a two-colour version printed object by object for a fast print.

I also changed the orientation of the counternuts for a bit better print quality.

If there is some request I can also provide the 54mm or 58mm versions, based on the original model.

coffee

coffee accessories

coffee accessory

coffee accessory organizer

Comment & Rating (13)

@minesweeper

Very nice model, just one ring is in the wrong handness and need to be flipped in z, be sure to check your slicer preview

(Edited)

The designer has replied

@Deepflash

Will check that

@Deepflash

do you mean the thread is in the wrong direction? But in general you can use all original parts and leave out the upper part and instead take my middle part.

(Edited)

@minesweeper

Replying to @Deepflash :

Yes

@pkrisz96

Print Profile

0.16mm layer, 5 walls, 15% infill

Prints like a charm. Threads are quite stiff at first but after break-in they are smooth. Printed in General PLA on H2S.

@user_913939404

Boosted

Print Profile

0.16mm layer, 5 walls, 15% infill

works quite well, sometimes coffee sticks to it, but I have a brush!

@phat3d

Hi, nice print but my La Pavoni although it is 51mm the cup is smaller and I would need a 49mm version... do you think you could make one? - I re-scaled it but am unsure about the screwing part of the model and to chicken to print everything wasting material :D