Mini Lip Balm Travel Container - Free 3D Print Model

Search models, users, collections, and posts

Devo4D

Tools>Organizers

IP Report

Print Profile(2)

All

P1S

H2C

X1 Carbon

P1P

H2S

P2S

H2D

H2D Pro

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

30 min

1 plate

5.0(28)

A1 Mini, 0.12mm layer, 2 walls, 15% infill

Designer

44 min

1 plate

5.0(5)

Open in Bambu Studio

Boost

274

851

491

377

Released

Description

During the winter season my lips love to get extra chappy, resulting in me feeling very crappy. Petroleum jelly (Vaseline) is the only thing that keeps me sane, it keeps my lips moist so I don't go insane. This is the main reason why I designed this small travel size container. To store a small blob of petroleum jelly for when I am at work or just outside doing my thing.

Possible Uses

If you use Vaseline often and wish to carry a small amount around with you when you are not home. Transfer some Vaseline from the large container to the Bottle Cap container.

Model Features

Their are two part to this design, the base and the cap.
Features a front lip with a hole that was designed to fit a keyring or a carabiner.
It can hang on anything with a loop paired with a carabiner or a keyring. For example, backpack or any type of bag with external loop and pants belt loop.

Comment & Rating (58)

@ebrsta

Print Profile

0.2mm layer, 2 walls, 15% infill

Very good and practical 🤌🏻

The profile uploader has replied

Show original

@Devo4D

Thanks! very nice

@tudor.pintilie

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed from the app using sunlu black pla on the A1, it came out perfect.

The profile uploader has replied

@Devo4D

Nice!

@AMEENAH

perfect print thank you very much

The designer has replied

@Devo4D

You're welcome. Enjoy!

@user_372195764

Print Profile

0.2mm layer, 2 walls, 15% infill

these are damn near perfect. i made a handful and stuck them in the car, coats, kid's backpack and hockey bag etc. and they are insanely convenient. worked perfectly in petg with no changes to your design. i might consider adding 4-6 larger external ridges to the cap to make them even easier to open for kids or weaker hands (just like sometimes drink bottle lids are hard for some folks) but that's just me - your design is flawless - i stepped on one and the cruddy mini caribiner i used bent but your design didn't flinch

The profile uploader has replied

@Devo4D

Thank you! I am happy that the design is helpful for you. I'm also glad to hear it survived a crush test 😆.

@McMakerLane

Print Profile

A1 Mini, 0.12mm layer, 2 walls, 15% infill

I have the A1 mini and this prints perfect! I printed one for myself and for my kids! Thank you so much!!

(Edited)

The profile uploader has replied

@Devo4D

you're welcome...enjoy!

@Bibliogrrl

Boosted

could you please make a profile for the A1 mini? thank you!

The designer has replied

@Devo4D

I can make an A1 mini profile but I don't own the A1 mini so I won't be able to verify the print quality.

@Bibliogrrl

Boosted

totally ok! I’ll be more than happy to test it and let you know. Thank you so much!

@Devo4D

Replying to @Bibliogrrl :

The A1 Mini profile is uploaded. Let me know how it goes.

@braga.studio

Print Profile

0.2mm layer, 2 walls, 15% infill

Simple, efficient, compact, and perfect printing

Show original

@drunkenbullet

awesome design,could you design one with the thred on both sides? that way you could have a second compartment for vitamins etc. love the print.

The designer has replied

@Devo4D

Thanks. To clarify, you want the threads on the outside of the cap? or the threads on the inside the container?

@drunkenbullet

Replying to @Devo4D :

nah i re thought about it in 3d printing terms./...if you could make a plate that has your design, but make the base (key ring side) half the thickness. put two base "parts", and two lids on the same plate. glue both base units togeather, to get a double sided container.

@drunkenbullet

Replying to @drunkenbullet :

or even remove the base matterial from inside to make one double sized container, which could be opened from each side

@user_3523103663

Print Profile

0.2mm layer, 2 walls, 15% infill

@3170

What the hell is that pic!😂

@melissaday

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.