Moose Elbows Up Hueforge

My first hueforge attempt. A patriotic moose for Canada!


Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size - The test print in the photos was done on my A1Mini at 150x150mm. Do not change z height if you want to resize.
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.4mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA PolyLite Brown Transmission Distance: 0.8
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA Overture Matte Brick Red Transmission Distance: 1.6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Brown
    At layer #13 (1.12mm) swap to Jade White
    At layer #25 (2.08mm) swap to Brick Red for the rest.