support FANATEC DD/DD PRO playseat
Print Profile(3)
Description
Boost Me (for free)
Hello, feel free to leave a review, happy printing👍
FANATEC DD/DD PRO playseat support
Support designed to fit the Fanatec DD and DD PRO wheel and the Playseat Evolution chassis
Print vertically for enhanced strength
Hardware:
10 M6 x 20mm screws
6 M6 nuts
4 M6 T-nuts
10 M6 washers
Assembly instructions:
1.Mount the support using the 4 M6 screws and 4 M6 T-nuts to the FANATEC base
2.Position the base on the chassis, place the two M6 nuts into the recesses
3.Fasten the two M6 screws with washers if needed
4.Insert the 4 remaining M6 screws and fasten the bolts with washers if needed
5.Tighten the 2 screws and 4 nuts
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (27)