Case for the FriendlyELEC CM3588 Plus NAS Kit

Designed for the CM3588 NAS kit from the people over at FriendlyELEC and their included .stp file from their Wiki.
My build is the CM3588 Plus NAS kit which has the upgraded Rockchip with more memory.
The NAS board doesn't change so this enclosure works with both the CM3588 and CM3588 Plus.
Each side panel has a cleat that inserts first on the IO side then snap-fits the rest of the way into the case
I have made a spring button that embeds into the case to use the buttons from the outside
There are 5 buttons that the board has but you could probably just use the power and reset button.
The case was designed for a 5v Noctua 60X15mm slim fan.
I've used the 5v fan header on the board with the proper connector (ZH1.5 2pin) that then connects to the Noctua Fan (NF-A6x15 5v) with the included wire couplers from Noctua.
There are holes for the NVMe/Power LED indicators that you can use with a small piece of transparent filament.

This thing is awesome as a nvme flash storage server. Running 24/7. Idles at 3.5 watts, peaks at like 7 watts rarely.  ~$3 / year in electricity at $0.10/kwh. 

chefsKiss.jpg 😙🤌

Print Setting Notes:

I have .step files over at Printables for you if you want to change anything.

To split the .step file model into each individual object:
(In slicer) Right-click model → split → to object

The .3mf files here have custom modifiers to make the fan grid/filter on the side panel. And a layer height modifier for the color change. Your results may vary depending on what slicer and version you use.

Print Bed: Textured
Nozzle: 0.4mm
Layer Height: 0.2mm

(Feel free to experiment and change what you like)