Drones Whoop adjustable launch pad print in place

This is a print in place launchpad for fpv drones. (You can scale it to your liking) It works with 65 and 65pro whoops (base and ledge dimensions are too small for 75-mm builds, and i hope i will add a version for 75/75 pro builds later).

Starting base dimensions are 70x70 mm and front ledge is 18 above starting base.
The starting angles can be set from 30 to 50 degrees with 5 degree step.
There are small pins in order to keep launchpad in its folded or start position.

Print in place clearances:

• vertical 0,2 mm;
• xy-dimensions 0,2 to 0,5 mm;
• 0,4 in hinges (in diameter dimension).

Printed in ABS, 3 walls, 0,2 mm layer height.