Fully Gaming Computer - With Interchangable Parts - Free 3D Print Model

Search models, users, collections, and posts

LinuX3D

Household>Decor

IP Report

GIF

Print Profile(4)

All

P2S

H2S

H2D

H2C

H2D Pro

X2D

A2L

P1S

P1P

X1E

X1 Carbon

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

37.7 h

14 plates

4.9(13)

Sliced to support more printers

Designer

36.1 h

14 plates

3.8(4)

50% Scale (untested but confident it works)

Designer

9 h

8 plates

4.8(12)

0.2mm layer, 2 walls, 15% infil

42 min

1 plate

5.0(3)

Open in Bambu Studio

Boost

3035

4837

323

199

1.9 k

588

Released

Description

Make Sure To Comment And Rate My Model! Thanks.

Boost Me (for free)

Consider boosting my model.

Membership

Check Out My Membership Page To Sell My Models

Join

Membership

Would you like to sell this model in your shop? Take a look at our Commercial Licenses

Join

New version coming this year. See my community post for more information.

3D printed Parts:

RTX 4090 Founders Edition.

NVME SSD.

AMD AM5 CPU.

AM5 Motherboard.

Heatsink for SSD.

2x UGLY RAM ram without a heatsink.

2x RGB RAM.

“360mm” watercooler

Case

PSU

Parts needed:

16* BT2x8 Socket Head Cap Self Tapping Screws (AA019)

24* BT2.6x8 Socket Head Cap Self Tapping Screws (AA004)

2* 8x2mm round magnet (not needed but recommended for a nice feel when putting the cpu in the socket) (CA005)

The printer will automatically pause on the cpu and motherboard for you to put a magnet inside, after putting it in press resume.

Assemble the aio:

Do this before installing it to the motherboard.

Align the tubes with the holes on the pump head and radiatior. Put a piece of filament through the hole to fasten it, and cut the filament.

Installing the aio:

Screw the pumphead from the back of the motherboard with the BT2.6x8 screws.

Installing Fans and AIO-Radiator:

Use the BT2.6x8 Screws.

Installing Motherboard and PSU.

Use the BT2.6x8 Screws.

Assembling the case:

Align the plates as seen on the pictures and screw them into place with the BT2x8 Screws.

Everything has been printed, but errors can occur because everything have gone through multiple iterations.

Let me know if there are problems or any changes.

Feel free to share work not remixed but compatible with “my” system (gpus, ram, cpu cooler, etc.) On this model page**

Future Upgrades?

Power Supply. ✔

Case. ✔

Magnetic cpu to make it satisfying ✔

PCI-E(GPU) & Ram locks, to be closer to a real pc ✔

Cables for real life updates: Will research.

**If you want to make compatible models and upload them do it on this model's page as a print profile. This is because its a MW exclusive model so its not allowed to be shared anywhere else. If it is uploaded somewhere else BambuLab (Not me!) will take down the model and may ban the user.

Boost Me (for free)

I have used a lot of time on this project and would appriciate if you supported me. Thanks :D. Anyway have a nice day.

Owlstown - Embed a Buy Me a Coffee Button

Want to support more than a boost? Buy me a coffee: https://buymeacoffee.com/linux3d

Comment & Rating (323)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.