Search models, users, collections, and posts
J. Cole - 4 your Eyez Only hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
1.9 h
1 plate
Open in Bambu Studio
Boost
21
35
3
1
23
15
Released
Description
Project: 4your.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x133.33mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.4mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Anyubic Gray Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Gray
At layer #12 (1.04mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (3)