Christmas Skeleton Candle Mold

This candle mold is designed for the simple production of candles that will delight every Nightmare before Christmas fan.
 

🛠️ Candle Making Instructions

1. Prepare the wick:
   • Place a candle wick in the center of the mold (you can fix it with a toothpick or skewer across the top).
2. Melt the wax:
   • Heat wax carefully in a water bath until fully liquid.
   • Recommended pouring temperatures:
     • Paraffin wax: ~60–70 °C
     • Soy wax: ~55–65 °C
     • Beeswax: ~70–80 °C
   • Do not overheat to avoid discoloration or fumes.
3. Pour the wax:
   • Slowly pour the melted wax into the mold to avoid air bubbles.
   • Tap the mold gently so trapped air can escape.
4. Cool and release:
   • Allow the wax to harden completely (several hours or overnight).
   • Carefully remove the candle from the mold.
5. Trim the seam line:
   • A small seam line may appear where the two mold halves meet.

   • Simply remove it with a scalpel or sharp knife for a smooth finish.

      

Notes on the Mold

• Holding rings:
  The mold is held together with rings at the top and bottom. These may fit quite tightly – this is intentional, as it minimizes gaps between the parts and ensures a cleaner, smoother candle.
• Surface texture (FDM printing):
  FDM 3D printing creates layer lines where wax can stick, especially on overhangs.
  • To improve release, smooth or coat the mold.
  • Release agents such as mold spray or even baking spray can help.
  • The mold can also be used without treatment, but small wax pieces may remain inside. The shape will still be clearly visible. 
• Material recommendation:
  • PETG is best due to higher temperature resistance.
  • PLA also works – I haven’t had problems with it so far.
• Print settings (recommendation):
  • 3 wall lines for stability

If you like this design, check out my other spooky candle molds as well – like the Pumpkin Candle Mold and the Ghost Candle Molds (A–D) 

Perfect to mix and match for your Halloween setup!