Cress Hedgehog
Print Profile(5)
Description
Hedgehog to grow cress.
In Poland where I live sowing cress is an Easter tradition. By the way, cress is a good addition to sandwiches and salads :)
Settings
For this project I used Bambu PLA Wood. I set the infill to 0%, but instead I increase the walls to 3. My goal was to seal the walls as much as possible since the cotton wool should be wet all the time. If the model leaks inside, simply make a hole in the foot and all the moisture should flow out. I also rotated the model so that it used as few supports as possible.
Instruction
After printing, apply soaked cotton wool to the hedgehog and sow some cress.
Water regularly. I will update photos as the cress grows :)
If you liked this project, check out my cressling creature as well.
https://makerworld.com/pl/models/2585639-cress-creature-cressling#profileId-2852271
Have Fun :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (259)