Aim-9X Missile Pen - Dimentionally Accurate! - Free 3D Print Model

Search models, users, collections, and posts

Spaceability

Hobby & DIY>Other Hobby & DIY

IP Report

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

1.7 h

2 plates

4.3(10)

Open in Bambu Studio

Boost

134

284

288

147

Released

Bill of Materials

Bambu Filaments

Select all

List other parts

Pen x 1: Bic

Description

ATTENTION: THIS MODEL WAS 100% DESIGNED FROM SCRATCH BY ME AND IS BY NO MEANS A REMIX OF OTHERS' WORK.

A dimensionally accurate Aim-9X missile pen. Simply Insert the internals of a Bic pen into the tip of the pen body and push the cap on. I used a Bic Cristal but I'm sure most Bic pen internals work just fine.

NOTE: Be gentle with the first use of the pen cap. Once the cap ‘breaks in’ and forms to the pen body, it will adopt a snug but easy to pull apart fit.

Documentation (1)

Assembly Guide (1)

GIF

Gif.gif

Comment & Rating (22)

@user_2627681881

Print Profile

0.16mm layer, 2 walls, 15% infill

It didn’t stick to the thing I think the part was too thin

The profile uploader has replied

@BELL3D

did u have a brim and clean the build plate and level it too

@user_2627681881

Replying to @BELL3D :

tanks

@Spaceability

I printed multiple during the design phase and didn't have a single failure on my textured PEI. If you have adhesion issues you can try adding a brim, but it wasn't needed for me.

@BELL3D

you have to be incredibly unintelligent to use the assembly guide

@BELL3D

I had to say unintelligent instead of s-t-u-p-i-d because of Bambu lol

@dtm247

This is cool!! Thanks for sharing :)

@user_1521428455

Very nice. Causes small stress factures on a few if pushed on all the way. And the bottom of fins on main body are very rough. Not sure if it is my fault or print but has happened on all.

@user_4040922286

Print Profile

0.16mm layer, 2 walls, 15% infill

Cap is a little to tight but if you force it it works.

@user_1521428455

Printed perfect!

@3DDPrints

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

it came out great. easy print.

@Mule85

I cant DM you so i have to leave a comment. This past weekend at the an airshow in San Diego there was a guy selling a TON of these. Not sure if that was you or not but I figured id let you know. I have some of his info if need be. Just trying to look out for ya.

(Edited)

@EZB747

f-104 pen pls

@christianpilot

bruh.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.