Print Profile(1)
Description
I have designed a flower pot with an irrigation system. This means you don't have to water the plant so often. Ideal if you're going on vacation for a week. The water level is indicated by a float. I used PLA for the flower pot, so I sealed the base with epoxy resin. The grid is printed with transparent PETG. WARNING!!!! I have uploaded the float separately because I printed it with a 0.2 nozzle on the A1 mini (I couldn't find a setting for this in the project). The remaining parts are printed with a 0.6 nozzle. A 6mm irrigation tube is also needed. These are readily available everywhere. If you like my work, I would be very happy about a boost :)
Boost Me (for free)
Boost for more new models!
Boost Me (for free)
Boost for more models:)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (39)