bee25 head mount, fixed-wing gimbal
Print Profile(1)
Description
Use the four screws on the original frame to secure it; the printed part does not require hot melt nuts. When tightening, pay attention to the force; don't use excessive force, it won't fall off, it's very sturdy.
The base is set at a 20-degree inclination angle, allowing the bee25 head to face the horizontal plane, and the antenna angle is also more appropriate.
The servo uses GDW's DS041MG, a 9g servo, 300 degrees; the blue servo arm is GDW25T, with an outer diameter of 23mm, and connects to the head mount using two M2 screws.
Please design the servo mount yourself according to the aircraft structure; this only provides the bee25 head mount.
Boost Me (for free)
If you find this design useful, please support it!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)