OldSchool RuneScape 99 Slayer Plaque V3
Print Profile(2)
Description
As the title reads, this is the level 99 OldSchool RuneScape Slayer plaque V3.
Improvements are:
- Textured “stone wall” due to printers having a hard time with the original large/flat surface.
- Holes on the reverse side for hanging on walls. Command strips of the right size will work also.
This specific pictured model was printed using an X1C with 6 AMS slots total.
If printing with a single AMS/AMS Lite, find the print profile for the Single AMS. These are the instructions:
Start: Slot 1 - Black Slot 2 - Gold Slot 3 - Gray Slot 4 - White
Pause at layer 68: Slot 1 - Black Slot 2 - Gold Slot 3 - Gray Slot 4 - Brown
Pause at layer 76: Slot 1 - Black Slot 2 - Gold Slot 3 - Gray Slot 4 - Yellow
Refer to the photo in “Single AMS” Print profile for AMS Mapping
Layer height of .16 is used to ensure small portions are properly constructed. An outer brim of 5mm is used to help prevent warping, and a brim-object gap of .35mm is used to ensure brim does not completely stick to the plaque. A Textured PEI plate was used for this model. The numbers in my model are Silk Gold PLA for the extra effect.
Thank you, and let me know if there are any improvements to be made.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)