Kinder Surprise Rabbit Gift - Free 3D Print Model

Search models, users, collections, and posts

Boxblitz

Household>Festivities

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.8(57)

Multicolour; Fuzzyskin; Better Fit

2.9 h

3 plates

4.5(4)

Open in Bambu Studio

Boost

595

1938

768

603

Released

Description

Content has been automatically translated.

Show original

Membership

You can get the commercial license here.

Join

Sweet money gift for Easter. Also printable without a bill! Well suited as decoration after gifting!

Comment & Rating (80)

@Pentecost

Print Profile

0.2mm layer, 2 walls, 15% infill

An adorably sweet design, perfect for gifting. Unfortunately, I also have that layer shift at the inner base. I even reprinted it, significantly tweaking the slicer settings, but to no avail. Which filament did you use? I used Sunlu PLA+ in white, which is quite translucent. Yours seems to have a wonderfully rich white hue.

The profile uploader has replied

Show original

@boxblitz

I experimented with numerous settings and prints, yet this imperfection persisted, unfortunately I utilized Bambu Lab’s Ivory White PLA Matte

(Edited)

Show original

@Pentecost

Replying to @boxblitz :

Could you please check your design file? Is it possible you have two separate bodies? I once had a similar issue where the base and walls were two distinct bodies

Show original

@boxblitz

Replying to @Pentecost :

I thought so too, but it was only the body. I've recreated the file now and used a different technique for the cavity. I'm printing it right now and will get back to you with a hopefully better result

Show original

@mmeidl78

Boosted

The print was incredibly fast. Just under an hour for the rabbit head plus heart ears. It's a minor shame that there are a few small, visible flaws where it joins the base plate. However, this is absolutely acceptable given the print time. The little ones will be delighted. Your next free boost is secured.

The designer has replied

Show original

@boxblitz

I'll try adjusting the seam position and then reprint it. Let's see if that's the issue. Otherwise, I can't explain the offset in some areas. It looks very pretty though!

Show original

@mmeidl78

Boosted

Replying to @boxblitz :

I don't believe it's the seam. It seems to me more like the transition between the body (where the Kinder Surprise eggs will be later) and the ear cover. I suspect the fill settings for the lid or something similar. But since the customer needed four pieces to give away, I preferred the faster print time. However, I noticed this when I imported the pure STL into Creality Slicer without your file's integrated settings. With the default settings, it takes a full three hours for the head and two ears—your tweaked settings, however, took only about an hour on the otherwise significantly slower Bambu A1 Mini. I think that's where the problem lies. (HA! Pun intended!)

Show original

@mmeidl78

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Got a little overhang but it was a great gift! Thanks!

@FZprint

Super easy print, worked perfectly on the first try. Unfortunately, a continuous seam is visible on the upper edge. The inner surface is partly fuzzy skin and partly smooth. For print optimization, the inside could be made completely smooth.

Show original

@feli.brockmann

Boosted

Thank you for your feedback, I will endeavor to rectify the error

Show original

@lordvoldavemort

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

I printed the ears at 98%, 100% didn't fit for me

Show original

@crisb.

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

A fantastic gift idea I had to reduce the ears to 98% to ensure a proper fit The white Sunlu PLA+ is unfortunately somewhat translucent, yet the result is beautiful

Show original

@user_2338532276

Print Profile

Multicolour; Fuzzyskin; Better Fit

Fits perfectly 💪 Many thanks for sharing 😊

Show original

@FZprint

Print Profile

Multicolour; Fuzzyskin; Better Fit

Unfortunately, a continuous edge is visible on the top of the lid. Fuzzy skin is partially activated inside as well, and could be optimized for print speed

Show original

@Kati_Stricker

I have yet to determine the cause of the misaligned layers

Show original

@Lucas_Sabrina

Print Profile

0.2mm layer, 2 walls, 15% infill

Fun Easter idea

Show original

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.