Jungle Jester

Jungle Jester 

Laughter is contagious—and this cheeky chimpanzee brings pure joy straight to the wall! His broad grin and playful expression make him practically leap from the frame, spreading good cheer. Whether as an eye-catcher in your living room or a gift for someone with a sense of humor, this detailed relief captures the energy and mischievousness of one of the world's most intelligent animals.

📏 Dimensions: 235 x 177 x 2.32 mm
⏳ Print time: approx. 10 hours 20 minutes
🎨 Materials used:

• Bambu PLA Black
• Bambu PLA White
• eSun Bone White
  Printed with a 0.4 Nozzle 

🛠 Note:
If your print bed is smaller or larger, you can scale the model in length and width. Ensure you maintain the proportions (e.g., 90% width = 90% length) to avoid distortion. The height must not be altered! Otherwise, the color layers will no longer align precisely.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 245x184.44mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA+ Esun Bone White Transmission Distance: 5
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Bone White
    At layer #19 (1.6mm) swap to Jade White for the rest.

Enjoy the print.