Glasses box for up to 4 glasses / Brillenbox für 4 Brillen - Free 3D Print Model

Search models, users, collections, and posts

knopoliver

Fashion>Glasses

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.6mm nozzle, 0.3mm layer, 3 walls, 10% infill

Designer

8 h

3 plates

4.0(2)

Open in Bambu Studio

Boost

154

123

Released

Description

This is still a work in progress!!

Ein einfaches Brillenetui für bis zu 4 Brillen und Reinigungstuch, das ich für meine Frau entworfen habe. Das mittlere Fach rechts ist für etwas größere Brillen. Gedruckt in PETG klar (Deckel) und PLA. Der Boden ist mit 2mm Wänden etwas stabiler entworfen, daher verbraucht man ca. 120g Filament, Druckzeit ca. 4 Stunden. Der Deckel steht in einer Version mit 1mm Wänden und einer mit 2mm zu Verfügung. Die 1mm Version braucht ca. 70g Filament und die Druckzeit beträgt knapp 1,5 Stunden.

Beim Deckel hab ich Support "Tree (auto)" "Critical regions only" gewählt, das ist lediglich für das Scharnier.

English version

A simple glasses case for up to 4 pairs of glasses and cleaning cloth that I designed for my wife. The middle compartment on the right is for slightly larger glasses. Printed in PETG clear (lid) and PLA. The base is designed to be a little more stable with 2mm walls, so you use approx. 120g of filament, printing time approx. 4 hours. The lid is available in a version with 1mm walls and one with 2mm. The 1mm version requires approx. 70g of filament and the printing time is just under 1.5 hours.

For the cover, I selected "Critical regions only" for the "Tree (auto)" support, which is only for the hinge.

Print Settings

Rafts: No

Supports: No

Resolution: 0,2

Infill:15%

Comment & Rating (8)

@BigMikeFlipz

Boosted

May need to resize a bit for larger glasses sizes but works great as long as you keep the appropriate scale adjustments across the base and the lid.

@BigMikeFlipz

Boosted

Update: increased scale on the base and reprinted, fits larger glasses fine now, hoping my resize on the lid correlates correctly. Works much better with slight size adjustment of approx 5%

@BigMikeFlipz

Boosted

Quick note, I failed to realize this was made for very small glasses, your wife must have very small glasses. The three on the right are about 10mm too thin and the height of the base is probably 5mm too low for adult male glasses. The slot on the far right is not big enough for a pair at all, so assuming they are for other glasses things. Pic is of my glasses squished in at an angle.