Monster Hunter Wilds Logo

Project: MHW Logo.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Sunlu Matte Blue Transmission Distance: 3
    PLA BambuLab Basic BambuLab Green Transmission Distance: 1.6
    PLA Sunlu Meta White Transmission Distance: 8
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (0.6mm) swap to Blue
    At layer #17 (0.8mm) swap to BambuLab Green
    At layer #20 (0.92mm) swap to White
    At layer #24 (1.08mm) swap to Orange
    At layer #44 (1.88mm) swap to Yellow for the rest.
 

Any black works. The sunlu colors all came from a color sample pack.