Tonies-inspired shelf
Print Profile(2)
Description
Tonies-inspired shelf
A small gesture, great support: subscribe
I want to remind everyone that this design is for personal use only. Unfortunately, someone dared to appropriate my design and sell it on eBay. Despite my efforts with eBay, they refused to remove the listing. It's a shame that some people don't respect the rules
The person has since removed my design from the eBay platform
Height: 548 mm
Width: 260 mm
Thickness: 72 mm
Print on Bambu Lab X1C
The parts can be glued or fixed with nuts. As you prefer
Print at 0.28 mm with a 0.4 mm nozzle for a total of 18 hours of printing
If you enable dynamic calibration at the start of printing, remember to remove the calibration test at the beginning of the print or disable dynamic calibration.
Magnet holder details:
The holders use 12x5 mm magnets
The magnets must all be oriented in the same direction to facilitate assembly
Glue the magnets in every other hole
You can also add light strips for an even more aesthetic effect
Boost Me (for free)
Your support matters! 🚀 A simple click on "Boost" can make all the difference for my project. Every boost helps me grow, reach more people, and go further. Together, we can achieve great things! Thank you for your support! 🌟
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (54)