Sailboat Brigantine
Print Profile(2)
Description
A semi-detailed model of a Brigantine type sailboat that is fully 3d printable.
Before printing:
- Please note that there are some small pieces needed to build this ship
- Having a way to remove thin objects from the build plate (e.g. scraper) is advised
Change log:
- Added a second print profile with a different and updated hull design
Build guide:
The 3d printed cables can be cut to length after connecting, a simple way to stop them from falling off is to bend them slightly.
I chose to reduce the amount of rigging a bit in my build, however feel free to make it as complex or simple as you want.
Step 1: Clean off the supports
Step 2 : Assemble the masts.
- Step 3: Connect the rudder
Step 4: Use the “cables” to connect the sails to the masts. (Having them all go on the same side makes the end result look cleaner)
Step 5: Place the masts on the hull (The smaller one in the back)
Step 6: Connect the Side Rigging as shown in the picture
Step 7: Place the Bell on the deck
Step 8: Connect the front Sails and bowsprit
- Place the model on the stand
Connecting parts numbered:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (41)