Dubbeglas Schorle Holder

When the first wine festivals start again in spring, or if you want to hike in the Palatinate and Germany on the vineyards, there is actually only one drink for refreshment - Palatinate Schorle!

But holding a Dubbeglas in your hand all the time is strenuous :-) So we developed the Schorle holder in Dubbe design. Simply hang it around your neck - put the lid on (if you like), and off you go!

It is best to print the holder in TPU.

I also printed the lid in TPU and used a structured smooth printing plate for it.

What else you need:

• Of course the 3D printed parts
• 90cm Paracord with 4mm diameter
• Two small pieces of heat-shrink tubing (approx. 1cm long) with integrated adhesive

Assembly:
Slide one end of the Paracord through the heat-shrink tubing, then thread it from the inside to the outside through the hole in the Schorle holder, bend the short end outwards and slide it back into the heat-shrink tubing.

Next, heat the heat-shrink tubing (I simply used a lighter) and fix everything.

Do the same on the other side.

If desired, fix the lid and you're done!

If you want to optimize something yourself, feel free to copy the original Onshape file here: https://cad.onshape.com/documents/45fd926c55d06d59674a8863/w/e9be515be34b00489e9cbd05/e/b1beec5a4e0b090ca9ce1370

Happy Printing & Happy Schorling!