EVA-02 Head Bust - No AMS Required
Print Profile(1)
Description
EVA-02 Head Bust – No AMS Required!
(V2 profile published, sorry to people having adhesion issue. I used a smooth PEI plate, and did not realize the position is not friendly to people using textured plate. I enlarged initial layer expansion and adding more trees manually for some of the larger pieces. In my experience this should help a lot. I positioned those large piece relatively vertical to reduce tree supports. But the ultimate solution for failed printing would be to position them horizontally. Sacrificing printing time for safer print. Please let me know if they still don't stick to plate.)
I modeled this from scratch, and I hope you'll add it to your EVA collection!
- Supports are easy to remove.
- Some parts are positioned slightly higher, so ensure your print bed is clean for better adhesion.
- The pieces have a loose fit to allow for easy scaling. I also tried printing at 60% size, and it still worked great!
Check out the assembly and demo video here:
📺 YouTube Link
If the YouTube link doesn’t work, refer to the GIF below for assembly instructions. Use glue or double-sided tape to attach the pieces.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (67)