Garden Hose Spray Ball Nozzle Female Threads FGH

This model is a hose ball attachment I designed to clean and thaw ice in gutter drain pipes. The ball goes at the end of a garden hose and spays with 5 jets : 1 x in front jet and 4 x side sprays. Side jets help keep the nozzle lifted towards the center of the pipe, thus easing the push of the hose in the drain. The model is also designed with rounded and smooth surfaces to prevent jams while pushing the hose in the drain. 

The spray ball features a 3/4" female garden hose thread GHT. (Your hose must be male). 

At the bottom of the threads in the spray ball, a flat surface is included in the design to add a standard hose rubber hasher.  The center hole inside the ball is 15.5mm (about 5/8in) to give a good flow.

[ Printing ]  Supports are required for the small lip portion where the washer will rest.

Licence and terms of use :

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

Liability disclaimer and use:

By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.