Magnetic Sweeper

Tired of picking up hardware that has been dropped on the floor, one washer at a time? Download and print this magnetic sweeper. It is designed for the US General 18" Bar Magnet sold at Harbor Freight (SKU 60433). https://www.harborfreight.com/18-in-magnetic-tool-holder-60433.html. 

Please see the Harbor Freight Bar Magnet Accessories Collection: https://makerworld.com/en/collections/5271222-harbor-freight-bar-magnet-models

For this Magnetic sweeper you will need: 

• Harbor Freight Bar Magnet
• Broom Handle with 3/4x5 Threads
• Three ¼-20 x1.5" or M6x40 bolts
• Four ¼-20x1 or M6x30 bolts
• Nine ¼" or M6 flat washers
• Four ¼-20 or M6 nylock (locking nuts)
• Two ¼-20 or M6 standard nuts
• One  ¼-20 or M6 wingnut

Assembly: 

Two ¼-20x1.5 or M6x40 bolts with 4 washers and nylock nuts to assemble the wheels and hubs. 

Assemble the hubs to the magnet with ¼-20x1 or M6x30 bolts, washers, and nylocks

Two ¼-20 or M6 nuts to embed into the pivot bracket along with short bolts to lock the pivot bracket from sliding side to side.  A ¼-20x1.5" or M6x40 with washer and wingnet for the broom handle attachment to the pivot bracket.