Tired of having a wet backside after riding my Onyx, I set out to find a way to extend the rear fender back a bit.

I printed with 15% support infill, 70% overhang. Print it upside down. You will use the existing 2 fender bolts but will also need 2 more M6 bolts/nuts and 4 washers to extend it. I had some M6 x 25mm long ones laying around and they worked great.

Bonus, this moves the brake light and rear turn signals back a few inches for better visibility, especially if you have the rear rack. No wiring extension needed, there is plenty of slack on the existing wiring.

If you don't have a 3d printer and want one mailed to you in any color you can imagine for $10, send me a message here.

Creality

No

0.24