Search models, users, collections, and posts
Print Profile(3)
Open ended design -6mm, 7mm, and 8 wide
Designer
4.9 h
3 plates
Original version WITHOUT HANGERS
Designer
2.9 h
2 plates
Original version with hangers
Designer
3 h
2 plates
Open in Bambu Studio
Boost
656
1498
41
10
665
189
Released
Description
There is now a profile which is open at the end and in 3 different widths to make it easier to find an LED stip light that will fit.
Check out the nozzle and filament design: Decorative 'neon' led light-Nozzle and filament - Free 3D Print Model - MakerWorld
- Make your own decorative neon light. Also available as spark shape: https://makerworld.com/en/models/1219426-spark-neon-look-light-decoration#profileId-1235975
- Prints in less than 2 hours without supports.
- Can be hung with included hangers or stuck on with double-sided tape.
- Insert the strip in the guide and apply glue of you want it to be extra secure. Cut the LED strip to size afer insertion. Make sure to cut between LEDS.
- The LED can be purchased on aliexpress, just search for neon led light strip NOTE: there are two types which are slightly different in width which is why there are 2 profiles, one for the wide (7mm) one and one for the narrow one (6mm). Make sure you print the right one for your strip
License
This user content is licensed under a
Creative Commons Attribution-NoDerivatives
Comment & Rating (41)