WiFi Devboard case for Flipper Zero - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Marco

Tools>Gadgets

IP Report

Print Profile(1)

All

P1S

X1 Carbon

X1E

H2D

A1 mini

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

54 min

1 plate

4.9(36)

Open in Bambu Studio

Boost

355

274

Released

Description

Upgrade your Flipper Zero experience with our specially designed 3D printed case for the Wi-Fi development board! This sleek and functional case offers enhanced protection, aesthetics, and usability for your Flipper Zero setup.

I really liked the original model and decided to improve it. I deleted the previous logo for a smooth surface and enhanched the model's strenght.

M1 screws needed.

Boost Me (for free)

Enjoy!

Comment & Rating (49)

@mushu_maker

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent 3D printed case for the Flipper Zero card. It provides solid protection while maintaining a sleek design. The print quality is great. Highly recommended!

@user_210080413

Could you please explain how to assemble the case correctly? The hole diameters on the top and bottom parts are different. If I use small diameter screws, they won't even touch the bottom half. It seems to me that the only option is to put nuts in the holes on the top half and tighten them with screws from the side of the bottom half. But in your photo I see screw heads on the top half... How does it work?

@mushu_maker

Replying to @user_210080413 :

To get the most accurate answer, I recommend contacting the creator of the model directly, as they will have the best insight into the original design. Regarding my build, I installed heat-set threaded inserts into the bottom part. This allows the screws to pass freely through the wider holes in the top part and thread securely into the metal inserts below.

(Edited)

@mushu_maker

@user_210080413

(Edited)

@EDW_Blambu

Print Profile

0.2mm layer, 2 walls, 15% infill

Fits Devboard like a glove!

@FrancescoM

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3562649047

how do you close it ?

@darinho23

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect Top

The profile uploader has replied

Show original

@marco_manelli

Thank you for the good review!

@suaimondi

Print Profile

0.2mm layer, 2 walls, 15% infill

Useful

The profile uploader has replied

@marco_manelli

Thank you for the good review!

@user_210080413

Cannot figure out how to screw it on. The hole diameters on the top and bottom are different. Do I need to use nuts? What is the exact length of the screws?