Apple cable fix - Free 3D Print Model

Search models, users, collections, and posts

Dmytro

Hobby & DIY>Electronics

IP Report

Print Profile(4)

All

Creality Ender-3 V2

A1 mini

H2D Pro

X1 Carbon

X1E

H2D

H2C

H2S

P2S

P1P

P1S

X2D

A2L

0.08mm layer, 3 walls, 15% infill

Designer

7 min

1 plate

4.6(7)

0.1mm layer, 2 walls, 15% infill

Designer

14 min

1 plate

4.8(4)

0.08mm layer, 2 walls, 15% infill

Designer

13 min

1 plate

4.0(10)

0.12mm layer, 2 walls, 15% infill

12 min

1 plate

5.0(5)

Open in Bambu Studio

Boost

293

604

451

239

Released

Description

Simple solution for broken iphone cable.

Better to print TPU, but PLA also works good.

Layer height - 0.08

I used B6000 glue for phone screens, like this

iphone

Comment & Rating (40)

@3MPrint_pro

Print Profile

0.08mm layer, 3 walls, 15% infill

Thank you ;)

The profile uploader has replied

@papushad

You are welcome, my friend :)

@user_3017024258

Boosted

Saved a bunch of cables. Printed great in Petg hf. to really make a permanent fix I ran a bead of hot glue down the open slot.

@user_3310850667

Print Profile

0.12mm layer, 2 walls, 15% infill

Pretty good

Show original

@user_3310850667

Print Profile

0.08mm layer, 2 walls, 15% infill

Pretty good

Show original

@Lucash727

Print Profile

0.08mm layer, 2 walls, 15% infill

nice

(Edited)

The profile uploader has replied

@papushad

Didn’t print well?

@Lucash727

Replying to @papushad :

oh MB bro I didn't respond I had trouble with it and my sister was mad 😓

@papushad

Replying to @Lucash727 :

Check adhesion settings, also decrease printing speed, it worked for me many times 😉

@user_4274600146

both mattepla, pla and petg with a completely clean bed does not stick to the bed, textured pei plate a1mini

The designer has replied

@papushad

Decrease printing speed

@papushad

This is a technical issue with settings, adhesion etc, not a model issue. Also try to add supports

@Chasee_.

Print Profile

0.08mm layer, 2 walls, 15% infill

Bed Adhesion Issue:the print unsticks

The profile uploader has replied

@papushad

Try to use some glue, or wash the table, it helped me

@Chasee_.

Replying to @papushad :

hello, i’ve washed plate before printing and it didnt worked.

@papushad

Replying to @Chasee_. :

try this glue https://www.etsy.com/listing/1264236035/glue-stick-non-toxic-twist-up-washable

@user_3519701168

why not make it one solid piece, then add a pause in the slicer at the top of the opening. then insert the cord into the part, secure the cord in place with tape and then resume the program. then when the program is done you can slide the protecter up the cord to the end and add a drop of glue to secure it.

The designer has replied

@papushad

Thanks, good idea. There can be a problem with supports and bad adhesion, but I will try.

@Ryno77

Print Profile

0.08mm layer, 3 walls, 15% infill

All good, thank you

Show original

@lorinnpro

Print Profile

0.12mm layer, 2 walls, 15% infill

good.. you will need some super glue!!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.