Print Profile(1)
Bill of Materials
Description
Boost Me (for free)
You can boost me for free to support my model makings!
Maglev Cloud
This was a fun brain collab between myself and my arts & crafts -crazed brother!
The model itself is very basic and serves as a base for the wool, this is a fun lil diy project that isn't just printing.
Maglev linked in the BOM
Hardware needed:
- Magnetic Levitation -kit
- Superglue
- Scissors
Software needed:
- Wool filling
Instructions:
Gather all your materials
and
2. Insert the led and coil into the base
3. Add the spacer ring
4. Place the magnetic puck, tucking the excess wiring below
5. Place the top part of the magnet housing. Align the grooves to that you dont pinch the wires.
6. Take some cotton and ball it up. Glue to the shell, starting from the bottom going around the model.
I tried to go with roughly this kind of pattern. The ball sizes and specific placements should not be exact, it gives the cloud a more natural look.
7. Once done, trim from the bottom to achieve a more “flush” bottom profile.
8. Bring the pieces together and your done!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (174)