PanPastel Palette

A PanPastels Palette I made for my wife. She really hates screwcaps so this was a great solution. 

The Pans fit tightly in the palette and you can hold it upside down without them falling out. I made a cut out so you can still read the bottom text and it helps with pushing them out when you want to replace them. 

It includes a lid and a utility box tray at the bottom and you can ad as many palette's as you wish. Everything is held in place by 5x5 magnets wich are press fit (hammered) in place. I used a dremmel or a bit of sandpaper on the magnetholes for easier fitment (they are very tight!)

NOTE: The palette prints upside down and does have a top and bottom since the PanPastels will fit only one way but this helps with keeping them clean and nice when stacking them. 

!! BE AWARE OF MAGNET ORIENTATION WHEN ADDING THEM !! Learn from my mistakes ;)

It's the first design that I upload and I hope at least somebody finds use in this. It did make my wife very happy totally validated my purchase of the printer LOL