ZOHD Nano Talon Evo VTX and Antenna Mount
Print Profile(1)
Description
Summary
I wanted a clean way to mount the VTX and Antenna on my Nano Talon Evo. These parts mount to the underside of the nose/canopy lid and are out of the way of the battery etc. You'll need to cut a 17mm hole in the lid for the antenna mount. The VTX-holder sits on the ribs under the lid. Both are held on with a drop or two of CA. That VTX is 22mm wide and there is a groove in the holder to slide it into. It sits just behind the NACA duct so it stays cool during flight.
Print Settings
Printer Brand:
Anet
Printer:
A4
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament: Filaments.ca PETG
Black
Notes:
Supports on for VTX Mount. Low infil = low weight. Printed on an Anet ET4
License
Comment & Rating (0)