Soda Stream Release lever (for Spirit/Easy/Fizzy) - Free 3D Print Model

Search models, users, collections, and posts

LukasP_

Household>Other House Models

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 3 walls, 30% infill

Designer

1.9 h

1 plate

4.8(12)

Open in Bambu Studio

Boost

223

179

Released

Description

Replacement release lever for soda stream spirit, should fit some other compatibile models also. This is exact copy of the original part. Feel free to modify for your needs.

soda stream

replacement part

Comment & Rating (14)

@colombo.simone8

Print Profile

0.12mm layer, 3 walls, 30% infill

For the spirit version there is a missing slot, but in general it's ok

Show original

@MAV2005

Print Profile

0.12mm layer, 3 walls, 30% infill

@applyuse

My SodaStream happened to break today, and I needed this part — so I decided to give a try. Unfortunately, I attempted 4 prints using different materials, all of them failed. After closely observing the final print, I discovered a critical design flaw: the part attempts to print an inverted pyramid structure on a circular base only about 5 mm in diameter. Unsurprisingly, when the overhang reached more than 7 cm away (best try in 4 prints) from the center support, the part collapsed. I’d really appreciate it if the designer could consider optimizing the support structure so this model can be printed more reliably. Thank you!

@PflanzPfoten

Print Profile

0.12mm layer, 3 walls, 30% infill

The pressure is okay, not feasible without support, otherwise okay. Unfortunately it does not fit the old Soda Stream model "Cool" - in case anyone is interested and looking for a replacement.

@kaelte1703

Boosted

Print Profile

0.12mm layer, 3 walls, 30% infill

Went well and Works!

@Dexter_art

Print Profile

0.12mm layer, 3 walls, 30% infill

unfortunately printed the wrong one but still good print profile haha

Show original

@ImmortalCookie

Boosted

Really nice Model. I just hat to cut away one small edge on the soda stream itself so that the lever could go up into the hole.

@user_573520569

Print Profile

0.12mm layer, 3 walls, 30% infill

@mesihah666

Print Profile

0.12mm layer, 3 walls, 30% infill

@barfcity

Print Profile

0.12mm layer, 3 walls, 30% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.