Mr_Andre

cover

0.jpg

1.jpg

3.jpg

2.jpg

plate_1.png

Print without supports.This is a fast high adhesion profile: the first layer was slowed down to avoid print quality or tolerance issues. The wall fill was set to a stronger tri-hexagon. The wall generator was set to Arachne for super adhesion. The layer height was set to 0.28. The print temperature was raised.

4h print profile: 0.28mm layer, 2 walls, 15% infill

2025-03-12_d82a40a1611b68.jpg

5,1h print profile 0.2mm layer, 2 walls, 15% infill

Print without supportsThis is a high adhesion profile: the speed of building walls has been slowed down to avoid problems with print quality or tolerance. The wall generator has been set to Arachne for super adhesion

5,9h print profile 0.2mm layer, 2 walls, 15% infill

4.jpg

Only blades with high adhesion profile: the speed of building walls has been slowed down to avoid problems with print quality or tolerance. The wall generator has been set to Arachne for super adhesion

Only blades! 0.28mm layer, 2 walls, 5% infill

handle

blade

plate_2.png

KikozZz

Pic.JPG

0.20 - Constant wall for the blade - Blade separated for adhesion0.28 Slice create artefact in the top of the blade.

0.2 - Constant wall - Blade separated for adhesion

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoy my models and would like to show your support, please consider donating a boost! Your contribution would mean a lot to me. 😊</boostcontent></boostme>If you like this project, you might also like the new version of my katana called the <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/2518846-golden-guard-katana#profileId-2770897">Golden Guard Katana</a>.&nbsp;<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/2518846-golden-guard-katana#profileId-2770897">https://makerworld.com/en/models/2518846-golden-guard-katana#profileId-2770897</a>&nbsp;<figure class="image image_resized" style="width: 59.52%"><a href="https://makerworld.com/en/models/2518846-golden-guard-katana#profileId-2770897" target="_blank" rel="noopener noreferrer ugc"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001202107/design/0607bd6faf3be32f.jpg"></a></figure><h2>Long Organic Katana (Print in Place)</h2>&nbsp;Length when unfolded ~ 80 cm&nbsp;I would like to present the folding Katana sword. In this version, I added a curved blade, and its tip is now cut at an appropriate angle. The blades extend and retract more smoothly.&nbsp;This project can even be printed on the Bambu Lab A1 Mini! I managed to print it without any supports, and the result was stunning!I’d be thrilled if you could share your experience in the comments—let me know how your print turned out and whether you’re satisfied with the design.You can print it in one color or experiment with multicolor options to bring out the details! :)Note:<ul><li>This is a model katana and should not be used as a weapon or given to children for play.</li><li>For best results, I recommend printing with PLA+ or PETG on a Textured PEI Plate.</li><li>If the adhesion of your printer’s plate weakens, consider using glue to improve grip and prevent your print from failing midway, saving filament and time.</li></ul><h3>If you are interested in selling prints of my models, check out my Patreon: <a target="_blank" rel="noopener noreferrer ugc" href="https://www.patreon.com/Mr_Andre">https://www.patreon.com/Mr_Andre</a></h3>

Print Profile(5)

Bill of Materials

Description