4 Inch Dust Collection Hose Skadis Hanger
Print Profile(1)
Description
Skadis Hanger for 4 Inch Diameter Dust Collection Hose
This particular hose I purchased at Woodcraft, but I also own a Jet 4 inch hose and it works for that too. Should work for any 4 inch diameter woodworking dust collection hose. Great way to keep your hose up and out of the way when not in use.
I've found that the weight of the hose will bow the skadis board. So I've attached an anchor just above the hanger. There are a lot of these models already on Makerworld that work well if you don't want to design your own.
This print pretty much maxes out the build plate and my print profile is set to Tree Slim supports, other support types won't fit on the build plate.
I prefer using 4 walls for high strength skadis hooks, but feel free to change this parameter if you want to save some filament. Not sure how long it will hold with fewer walls. Although, you could print in PETG and probably get away with only 3 walls.
Print for yourself or use as inspiration to design your own!
https://www.buymeacoffee.com/jt_311
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)