Ultimate Toothpick Crossbow V2
Print Profile(1)
Description
Introducing V2 of the Ultimate Toothpick Crossbow! Now, prints in place with no assembly in less than 25 minutes. To use, pull back the bow and make sure it catches above the trigger mechanism. Load the toothpick in the hole at the front, press the trigger, and let it fly!
Notes:
PETG is recommended due to its flexibility. A high-quality PLA may also do the trick.
If the toothpick is getting stuck when you trigger the bow, this is due to the tolerances of different toothpick brands. The toothpick should slide freely in and out of the bow to function correctly. If your toothpicks are too large, let me know and I can upload a model with larger tolerances.
Enjoy, and be safe! DO NOT point at others, especially towards the face.
Let me know what you think.
Boost Me (for free)
If you are a fan
Of the things I produce,
Show some support
And give me a boost!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (110)