Sailboat - Cutter
Print Profile(1)
Description
Please Note:
A fully reworked model of the cutter - “Sailboat Series - Cutter (Remastered)” - is available for printing.
(Also featuring a better build guide)
-----------
A fully 3d printed model of the cutter sailboat type, based on designs during the 18th century.
The 3d model is semi-detailed and includes simplified rigging and sails.
Since there are a lot of small, fragile parts on the deck of the ship, removing the supports should be done carefully.
(I am aware of the issue of the rudder and handle breaking easily. Those issues are fixed in the reworked version)
---------
Build Guide:
Step 1: Carefully remove the supports on the main hull. Be especially cautious near the rudder and rudder-handle
Step 2: Take the rigging lines pull them through the small holes of the masts (Grouped below)
Step 3: You can either secure the rigging lines with small knots or just bending them. Excess material can be cut of (e.g. with scissors)
Step 4: Connects the horizontal mast parts to the mast and set it into the hole on the boat
Step 5: Finish the rigging (side)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)