Fish Tank Net (Fully Optimized Strength, No Supports Needed) - Free 3D Print Model

Search models, users, collections, and posts

Mr li

Household>Pets

IP Report

Print Profile(2)

All

A1 mini

X1 Carbon

H2D

X1E

P1P

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

(PLA) 0.2mm layer, 2 walls, 20% infill

Designer

1.5 h

1 plate

4.5(25)

(PETG) 0.2mm layer, 2 walls, 20% infill

Designer

1.6 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

283

745

742

476

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

Your support fuels my creative endeavors

July 3, 2025: The model has undergone comprehensive optimization and now requires no supports, with significantly enhanced strength:

1. The fishing net's strength has been significantly improved; the revised version is highly durable;

2. The interface between the fishing net and the rod has been optimized. The fishing net no longer requires supports, and the net connection is now an octagon;

3. The fishing rod has been optimized to eliminate overhangs, preventing printing failures;

4. Testing with PLA and PETG yielded excellent results;

5. A 0.2mm clearance has been incorporated at the juncture of the rod and net. Should there be any looseness, a dab of adhesive may be applied

Happy printing

Comment & Rating (45)

@user_2104152907

thank you for this, I created an addon that fits the other side, so I don’t have put my arm all the way in my tank to remove some debrid that’s been sucked against the filter.

@AlanAlias

Hello could you put the extender on? I think it's a great idea Thank you

Show original

@68Fastback

Print Profile

(PLA) 0.2mm layer, 2 walls, 20% infill

the net is very flimsy. in my case it was a loose fitting between net and rod unless I forced in further into the hole. Will probably try to print again using different filament and will update review after

The profile uploader has replied

@Mr_li

A new version has been uploaded, with optimized model structure, search for Fish Tank Fishing Net Fish Tank V2.0

Show original

@rainque

Unfortunately failed twice on Bambu Lab A1 with 0.4 nozzle, both times at the edge of the handle.

The designer has replied

@Mr_li

It seems the layers didn't adhere well, try increasing the nozzle and bed temperatures

Show original

@Feli3D

Print Profile

(PLA) 0.2mm layer, 2 walls, 20% infill

pop a lots ….

@julio.kawai

Print Profile

(PLA) 0.2mm layer, 2 walls, 20% infill

The net part turned out perfect but I had a problem with the fit. It warped and the whole cable came out a bit crooked. I used a craft knife and it fit.

Show original

@user_1471699900

Print Profile

(PETG) 0.2mm layer, 2 walls, 20% infill

@sebi2000

Boosted

Print Profile

(PLA) 0.2mm layer, 2 walls, 20% infill

@user_34639325

The design is excellent, however, it is somewhat prone to breakage

The designer has replied

Show original

@Mr_li

😂You could try my V2.0 version, the quality is significantly improved

Show original

@Mr_li

I've optimized a 2.0 version, but its reach isn't as extensive as this one, you may have overlooked it

Show original

@ModernGutenberg

Boosted

Print Profile

(PLA) 0.2mm layer, 2 walls, 20% infill

Exactly what I was looking for! I shrunk the file to 60% to reduce hole sizes (probably did not have to but I did) and lengthened the handle to give me more reach. The bucket is not the most structurally sound print, I broke the net on the first print trying to attach the handle, but it is perfect for catching specific shrimp to relocate to the cull aquarium.

The profile uploader has replied

@Mr_li

Try version 2.0, I've made modifications, significantly increasing its strength

(Edited)

Show original

@junglejason

The print profile is no longer public

bad quality. broke very easy . print with pteg and still poor quality. Sad since i love the model handel was good but not the net quality

The profile uploader has replied

@Mr_li

I will consider how to optimize the model

Show original

@Mr_li

A new version has been uploaded, with model structure optimizations. Search for Fish Tank Fishing Net V2.0

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

伸缩式捞鱼网 Telescopic fishing net

Fish tank anti-jump net/鱼缸防跳网

Kevin1993

451

311