well made, but it’s at best a fry holder or berthing chamber. the size is pictured next to a standard “Lee’s” catch cup. it’s too small to hold more than a few adult fish. I can’t share the mods to fit on a 25mm rim. ( it’s pictured on a 20mm rim. )

Mark H

（15MM鱼缸）0.2mm 层高, 3 层墙, 25% 填充

(15MM Fish Tank) 0.2mm layer height, 3 walls, 25% infill

user_3685927266

Armagedon_2017_

（12MM鱼缸）0.2mm 层高, 3 层墙, 25% 填充

(12MM fish tank) 0.2mm layer height, 3 walls, 25% infill

s5862140

（4-5MM鱼缸）0.2mm 层高, 3 层墙, 25% 填充

(4-5MM Aquarium) 0.2mm layer height, 3 walls, 25% infill

perfect print. any chance you could make a in a 20mm print for a rimmed tank if it’s easy to adjust?

thomas

Driftdesigns

Bluize1961

amazing model 
i tweaked mine a bit by adding a middle section for fry to fall into and elongated it abit


Tayphun

（6MM鱼缸）0.2mm 层高, 3 层墙, 25% 填充

(6MM Fish Tank) 0.2mm layer height, 3 walls, 25% infill

user_1552451805

marshal oskolochek88

Mr li

cover

7.jpg

1.jpg

2.jpg

4.jpg

5.jpg

6.jpg

隔离盒6.png

隔离盒4-5mm.png

隔离盒8.png

隔离盒10.png

隔离盒12.png

隔离盒15.png

plate_1.png

2025-03-11_e208167f103d2.jpg

3.jpg

8.jpg

9.jpg

隔离盒4-5.png

6MM fish tank uses this configuration

12MM fish tank uses this configuration

15MM fish tank with this configuration

8MM fish tank with this configuration

(8MM Fish Tank) 0.2mm layer height, 3 walls, 25% infill

10MM Fish Tank with this configuration

(10MM Fish Tank) 0.2mm layer height, 3 walls, 25% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>为我助力</boosttitle><boostcontent>您的每一张助力都将成为我创作的动力</boostcontent></boostme>设计了一款鱼缸隔离繁殖盒子，1.整体尺寸15CM*5CM*7CM，针对4mm 5mm 6mm 8mm 10mm 12mm 15mm厚的鱼缸玻璃，分别修改模型后上传了配置；2.采用PETG打印，1.5MM壁厚，1*2mm开孔，经久耐用，避免了PLA怕水的问题；3.调整了孔的排布，如果尺寸嫌小，可以横向放大，孔不会变大；

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Your support fuels my creative endeavors</boostcontent></boostme>A fish tank isolation breeding box design is presented,1.Overall dimensions 15CM*5CM*7CM, configurations for 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, and 15mm thick aquarium glass are provided;2.Printed using PETG, 1.5MM wall thickness, 1*2mm vents, durable and water-resistant unlike PLA;3.Vent arrangement optimized; for larger dimensions, scale horizontally without altering vent size;

Print Profile(6)

Description

Comment & Rating (20)

License

Related Models

Fish Tank Breeding Box

Print Profile(6)

Description

Comment & Rating (20)

License

Related Models