Shingled Birdhouse and Ladybug House
Print Profile(6)
Description
A beautiful spade shaped shingled birdhouse. It is easily customizable so you can choose the exact colors for your backyard. Easy print with snap together fittings.
I have included a ladybug insert, along with a wood grain faceplate and solid faceplates so you can customize and add your own sized hole to fit your exact needs. Hangs with 1 screw/nail for the rear.
The small screw is to block off the perch hole if you dont want to use a perch.
- Update 3/23/2025 - Labeled the roof with an arrow pointing towards the front to make sure its not assembled backwards.
Printing and Assembly Tips:
- Make sure the roof is not on backwards, the overhang is on the front not the back.
- No supports are needed, although some of the edges of the roof shingles will sag. Turn on supports if you want it perfect.
- The Ladybug insert will take a very long time(16+ hours) and use a lot of filament at stock settings, be sure to use 1 wall and 0 infill when printing it.(already on in my print profile)
- Glue the roof and faceplate on if you dont plan on changing them.
Boost Me (for free)
Thanks for the support.
Membership
Want to be able to sell my designs? Membership is only $10 a month!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1582)