Origami Foldable Measuring Spoon - TBSP/ML
Print Profile(6)
Bill of Materials
Description
Membership
If you wish to sell prints from my designs please check out my commercial license membership :)
UPDATE: It was brought to my attention that the spoons don't stay closed for some of you. I am sorry for this. The TPU i tried so far and worked for me are: BambuLab 95A HF, Eryone TPU High Speed. Polymaker was a bit stiff
I made the popular foldable measuring spoon available for 3d printing!
Must be printed in TPU ( I used 95A shore TPU)
You Must use neodymium magnets. The design was made with the strength of neodymium magnets in mind.
I added a pause at layer 16 so you can embed the magnets.
You need: 8pc - 10x2mm magnets for the big spoon
4pc - 8x2mm magnets and 2pc - 4x2mm magnets for the small spoon
You don't need glue for the magnets as long as you use a stainless steel nozzle.
Please make sure you place the magnets in the correct orientation.
The spoons should be stored flat, not folded in a certain position. For example you can stick them on your fridge or as a bookmark in you cooking book! If they are kept folded, the tpu can stretch in that position and won't work properly after some time.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (90)