Keyboard Wall Mount
Print Profile(1)
Description
Hello everyone,
here for printing on my A1 a wall mount for any type of keyboard to display it on the wall. This wall mount consists of two angled parts, and for easier attachment and securing, I have added a connecting rod with a groove. This allows you to perfectly position your keyboards in your setup for display.
What you will need:
- 2x countersunk wall screws 4x50 or 5x50, preferably in the color of the printing material
- 2x 5mm or 6mm wall plugs
Also check out my matching storage compartment for storing the USB cable or switches, instructions, etc.
Keyboard Wall Mount Storage Compartment by TechGearOpsMakerWorld: Download free 3D models
Bambu A1 settings:
- 0.4mm nozzle
- 25% infill
- Supports: automatic tree support
I used original Bambu PLA
Have fun printing!
I would be very grateful for a boost or a like as well as a good rating from you. Creating something like this takes a lot of work, so a little attention from your side would be appreciated.
Thanks in advance everyone :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (52)