Auxiliary Fan Grill/Cover Version 2 for P1P/P1S/X1C
Print Profile(7)
![[PETG] 0.2mm layer, 5 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US451b00d1542dcf/149287491/instance/2024-11-02_d14c53023bdbd.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
Boost Me (for free)
Give me a free Boost if you Like !
IF YOU LIKE THIS MODEL GIVE ME A “THUMBS-UP” SO MORE PEOPLE CAN DISCOVER THIS MODEL. THANKS
DO NOT PRINT IN PLA DUE TO LOW HEAT RESISTANCE
V2 Out Now! (13.01.2025)
Whats New:
- Fitting Tabs Rounded
- Reduced the Infill to 17% for better Airflow
- Relocated Fitting Tabs for easyer install
- Fitting Hook included for installation Help
- Added an Installation Foto Guide
This is my lovely Aux Fan Grill Cover Honeycomb Style.
Locate the Space for the Grill to Fit in
2. Slide in the two Tabs into that Space.
3. Hook in the Tool near the left Tab
4. Slightly bend in the Tab while pulling on the Hook.
5. Done!
STL DOWNLOAD ONLY:
- Do not print with thicker Layer than 0,2. This can cause to make it more difficult bend the tab in.
- No Top and Bottom Layer
- 17% Infill Honeycomb
- 4 Walls
DO NOT PRINT IN PLA DUE TO LOW HEAT RESISTANCE
I did this Perfect fitting Auxilary Fan Grill to match my Toolhead Fan Grill and the Motor Cover.
( https://makerworld.com/de/models/114352#profileId-122922 )
( https://makerworld.com/en/models/171078#profileId-187811 )
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3995)