3 keys mechanism sound tubes player
Print Profile(2)
Description
An improvement and larger version of 3 piano keys mechanism with Varying Djembe sizes . One comment was the strength, so I made the tubes a second part that clips on, @L10design gave good info on the sound membrane and I tried the 0.2mm thick membrane for the tubes and the sound is much better. I also modified the diameters to be closer to the sizes from the TAPOPHONE by L10Design.
- This model has larger keys, better sound differences, uses a 0.2mm thick membrane (make sure your first layer prints well) and less support removal because the tubes are a separate part that has to be assembled.
Youtube video of it playing
-when assembling, please still be careful of the clip. engage the sound tube assembly all to one side and slide the other end down (pulling opening the Clip slightly will help but once it holds, it stays very securely.
Boost Me (for free)
If you like this model, please share a boost. Hopefully I can make more models
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)