Customize size washer / gasket / spacer

Customize size washer / gasket / spacer.

You can customize the size of the washer / gasket / spacer.

You can design more similar things with this model.
For washers, specify the inner and outer diameters you need, and specify the height of the washer. Use a hard material, depending on the application.
For gaskets, you need the outer, inner diameters, and thickness. In this case, use a flexible material for printing, such as TPU.
For spacers, you need the outer inner diameter and specify its height. PLA, PETG material is recommended, but other materials are also suitable.

Use a very clean plate because the adhesion will not be adequate and I recommend using a plate with good adhesion such as textured PEI or PEI plate.

My modells: my modells.

Among my models you will find several other constantly expanding railway tracks, you should look around among my models and download them.
If you are satisfied with my work, please, in addition to downloading the model, printing and evaluating it, you can also support it with boost.

Print, use and enjoy!