Kill Team Display Stand for Vespid Stingwings

Showcase your Vespid Stingwings Kill Team in style with this custom display stand! Designed for 11x 28mm bases + 1x 25mm base, this stand keeps your models securely in place while maintaining a clean and organized presentation.

🔹 Compatible Add-ons:

• Plexiglass Cover: Protect your display with the magnetic locking system – Check it out here.
• Display Plaque: Add a professional label with the Vespid Stingwings plaque – Find it here.

Printing Instructions:

•  Thicker layer lines are fine for faster printing, but iron the top surface for a smooth base.
•  For the magnetic plexiglass cover, embed 5x5mm cube magnets during printing.
•  Stop the print at layer 23 to insert the magnet before continuing. Check polarity!
•  The print is split into two parts to fit the A1 Mini – they self-align and can be easily glued together.

Basing Tips for Best Results:

• Mask the edges with tape before painting to prevent paint from rubbing off on your plexiglass cover. 
• Use additional basing materials (ruins, plants, etc.), but keep it subtle to avoid overshadowing your models.
• Always use a good primer to ensure proper paint adhesion to PLA.

Have fun customizing your display, and let me know if you have any suggestions for improvements!