Dog's Diary

cover

IMG20250309211356.jpg

IMG20250309211345.jpg

QQ20250309-215233.png

plate_1.png

2025-03-09_28e0e6fa26ab2.jpg

开启Brim，Brim距离设为0，象脚补偿也调整为0。2层壁厚，填充随意。开启支撑可获得较好的表面质量。

Enable Brim, set Brim distance to 0, and adjust elephant foot compensation to 0 as well. Two wall thicknesses, and infill as desired. Enabling supports yields better surface quality.

Supports are recommended for optimal surface quality, though printing without them may still succeed

justtiana

Screenshot 2025-08-23 at 14.42.08.png

<ul><li>Change: The end tip was cut in an angle for more ergonomic use</li><li>Optimized for the A1 Mini (will also work on all other printers)</li><li>Set to 0.16mm High Quality (can also be printed quicker in 0.2mm Standard mode)</li><li>Includes support to make sure it prints properly</li><li>The optional little cap has been removed from this model, as it won&#39;t fit on the new angled end!</li></ul>What has been changed?The original tip has a flat end, so in order to use it, you would have to hold your vacuum in a 90 degree angle – therefore I cut the end of the tip in an angle that allows you to hold the vacuum closer to the ground.Nothing life changing, but more intuitive and helpful for me, so I wanted to provide it for others as well. Enjoy!

Angled tip for more ergonomic use

sbhonda

IMG_0841 2.jpg

Screenshot 2025-03-11 at 9.32.21 PM.png

Hole for 8x3 mm magnet starts at layer 3. There is a pause at layer 19 to add the magnet. It&#39;s a small magnet, so the hold won&#39;t be strong, but it&#39;s sufficient to hold its own weight (as long as you&#39;re sticking it to an appropriate surface). Other than checking the “on build plate only” box for supports (so there would not be supports added in the magnet hole), no other print profile settings have been changed from the original.

8x3 mm magnet at base for storage

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

戴森吸尘器最小的吸头在应付一些细小的角落时仍会有些死角，这个配件可以更好的清理一些小的角落。另外还设计了一个可自选是否打印的接头，在多数时候可以用于吸走耗材袋子里的大部分空气&nbsp;注意：本模型基于戴森V8进行创作，经评论区的朋友反馈，本模型无法适配戴森V6，戴森V6用户请勿下载。

Even the smallest Dyson vacuum cleaner nozzle leaves some hard-to-reach corners, this accessory allows for more thorough cleaning of tight spacesAn optional connecting piece is also included, primarily designed to remove most of the air from filament bags Note: This model is designed for the Dyson V8 and, as feedback from the comments section indicates, is incompatible with the Dyson V6; Dyson V6 users should refrain from downloading

Print Profile(3)

Description

Comment & Rating (377)

License

Related Models

Dyson Vacuum Extension Nozzle

Print Profile(3)

Description

Comment & Rating (377)

License

Related Models