XARILK/TS PROF KNIFE SHARPENER CENTER JIG

I DID MINE OUT OF PETG CF. SHOULD WORK WITH PLA ASWELL. USED X2 H6XH12 HEAT INSERTS FOR THE OUTSIDE HOLES. USED ORIGINAL THUMB SCREWS TO SCREW INTO THE HEAT INSERTS. USED X2 M6X20MM WITH WASHERS FOR CENTER CLAMPS. USED 100% INFILL AND 10 LOOPS AS I WANTED IT AS RIGID AS POSSIBLE. NORMAL SUPPORTS ON BUILD PLATE ONLY. MORE ACCESSORIES TO COME.